TPLINK TAPO C500 Outdoor Pan/ Tilt Security Wi-Fi Camera
Rp123.00
TPLINK TAPO C500 Outdoor Pan/ Tilt Security Wi-Fi Camera
----------------
Specification :
CAMERA
Image Sensor : 1/3''
Lens : Focal Length: 3.89 mm
Aperture: F2.0
Field of View: 85.5°(Diagonal), 73.5°(Horizontal), 41°(Vertical)
Night Vision : 850 nm IR LED up to 98 ft/30m
Interface & Button : 1× RESET Button
1× MicroSD Card Slot
Pan/Tilt Range Pan Mechanical Range: 340° (360° Pan Coverage)
Tilt Mechanical Range: 90°(131° Tilt Coverage)
View Range : 360° horizontal and 130° vertical
Resolution : 1080p Full HD(1920 x 1080 px)
VIDEO & AUDIO
Maximum Resolution : 1920 × 1080 px
Frame Rate : 15 fps
Video Compression : H.264
Live View : Yes
Image Enhancement : 3DNR
WDR
Audio Input & Output Built-in Microphone and Speaker
Audio Communication Two-Way Audio with Noise Cancellation
Siren Volume : 90 dB (Level measured at 4-inch/10-cm distance)
STORAGE
Local Storage : MicroSD Card Slot on Camera (Up to 512 GB)
Cloud Storage : Tapo Care Cloud Storage Services (Subscription required)
VIDEO
Frame Rate : 15 fps
Video Streaming : 1080p
Video Compression : H.264
DETECTION and NOTIFICATIONS
AI Detection : Motion detection
Person detection
Tamper detection
Activity Zones : Yes
Output Notification : System Notification
System Notification with Snapshot (Tapo Care Services)
AUDIO
Audio Communication 2-way audio
Audio Input & Output Built-in microphone and speake
NETWORK
Network Connectivity : Connect via Wi-Fi
Wireless Connectivity : IEEE 802.11b/g/n, 2.4 GHz Wi-Fi
Wireless Security : WPA/WPA2-PSK
RTSP : Yes
ONVIF : Yes
Standards and Protocols : IEEE 802.11b/g/n, 2.4 GHz
Security : 128 bit AES encryption with SSL/TLS
Frequency : 2.4 GHz
POWER
Power Source : 12V DC Power Adapter
Input Voltage : 100-240 V, 50/60 Hz
Output Voltage : 12V, 1 A (DC Power)
HARDWARE
Button : RESET button
Indicator LED : System LED
Adapter Input : 100-240V, 50/60Hz
Adapter Output : 12.0V/1.0A
Dimensions (W x D x H) : 4.9 x 4.8 x 3.5 in. (123.8 x 123 x 90 mm)
GENERAL
Weather Resistance : IP65
System Requirements : Tapo App: iOS 9.0 or higher, Andriod 4.4 or higher
Mounting Options : Ceiling-Mounted
Wall-Mounted
Pole-Mounted (Pole-Mounting loops required but not included)
Operating Temperature : -30℃~60℃
Storage Temperature : -40℃~60℃
Operating Humidity : 10%~90% RH, Non-condensing
Storage Humidity : 0~90% RH, Non-condensing